25cm Ultra Thin Cabinet LED Light for Wardrobe Lighting
Function:
warm/white：
1. Charging indicator: The red indicator light is on during charging, and the green light is on when fully charged.
2. Switch mode:
Click: Automatic sensing/Long light up for 30 minutes Long press: Endless dimming 3 consecutive times Press: Turn off power
When left on for 30 minutes, the blue indicator light comes on, and when automatically sensed, the blue indicator light goes off
3. Installation and fixation:
Stick two black magnets onto the grooves of the back shell of the lamp and a clean wall, and then attach the lamp body to the black soft magnet.
Reminder: When installing, the sensing head should be facing the human activity area, and there should be no obstruction in front of the sensing head to avoid affecting the sensing function.
4. Human body sensing mode:
In a dark environment, when the sensing head detects someone moving within a range of 0 to 4 meters and an angle of 120 °, the light automatically lights up, and it automatically turns off after 20 seconds of not sensing human activity.
Tricolor：
1. Charging indicator: The red indicator light is on during charging, and the green light is on when fully charged.
2. Switch mode:
Short press: white light/warm white light/yellow light/turn off light, cycle switching
Long press: infinite dimming
Quick press 2 times: Flash 2 times to enter the timer for 30 minutes. Short press halfway or after the timer is completed, it will automatically enter the induction mode.
3. Installation and fixation:
Stick two black magnets onto the grooves of the back shell of the lamp and a clean wall, and then attach the lamp body to the black soft magnet.
Reminder: When installing, the sensing head should be facing the human activity area, and there should be no obstruction in front of the sensing head to avoid affecting the sensing function.
4. Human body sensing mode:
In a dark environment, when the sensing head detects someone moving within a range of 0 to 4 meters and an angle of 120 °, the light automatically lights up, and it automatically turns off after 20 seconds of not sensing human activity.
Parameters:
warm/white：
Power input: 5V/500mA
Long light duration (relay): up to 3 hours of brightness to up to 30 hours of darkness
Maximum power: 0.8W
Number of lamp beads: 20
Battery capacity: 3.7V 500mAh
Lamp bead color temperature: "White light version: 6000-6500K/Warm light version: 4000-4500K"
Charging time: 3 hours
4.2V luminous flux: 20~60 lumens
Charging cable: white TYPE C with a length of 50CM
Induction frequency: highest brightness: delay of 20s ≥ 540 times
Standby power consumption: daytime: 16uA, nighttime: 60uA
Minimum brightness: delay of 20s ≥ 5000 times
Product overvoltage protection 4.2V
Color rendering index: True white: Ra=84.5 Warm white: Ra=74.8
Low voltage cutoff protection: 3V/16uA
Switch position: induction mode/long light for 30 minutes/infinite dimming/shutdown
Tricolor：
Power input: 5V/500mA
Long light duration (relay): up to 3 hours of brightness to up to 30 hours of darkness
Maximum power: 0.8W
Number of lamp beads: 40 (20 yellow lights+20 white lights)
Battery capacity: 3.7V 500mAh
Lamp bead color temperature: "White light: 6000-6500K/Yellow light: 3000-3500K"
Charging time: 3 hours
4.2V luminous flux: 20~60 lumens
Charging cable: white TYPE C with a length of 50CM
Induction frequency: highest brightness: delay of 20s ≥ 540 times
Standby power consumption: daytime: 16uA, nighttime: 60uA
Minimum brightness: delay of 20s ≥ 5000 times
Product overvoltage protection 4.2V
Color rendering index: "True white: Ra=84.5/Warm white: Ra=74.8"
Low voltage cutoff protection: 3V/16uA
Switch position: induction mode/long light for 30 minutes/infinite dimming/shutdown
Selling point:
1. The large panel emits uniform light without glare or spot
2. Strong magnet adsorption, no punching, easy installation
3. Infinite dimming, induction mode, 30 minute long light mode (blue indicator light comes on when long light is on)
Note: The Tricolor has three adjustable Lights colors 
